German axle
The axle is connected to the frame through the suspension, and wheels are installed at both ends of the axle. The function of the axle is to bear the load of the car and maintain the normal driving of the car on the road.
Features:
1. Mainly function is for both primary and secondary demolition work.
2. It’s low noise, no vibration, meet the requirements of environmental protection, which are Suitable for city and high-tech zone demolition project.
General parameter table
Model | Capacity (kg) | Brake size (mm) | Track (mm) | Axle Tube (mm) | Studs | PCD | Total length (mm) | Bearing |
LHG-12T | 12000 | S420*180 | 1840 | 150*150*12 | 10*M22*1.5 ISO | 335 | ~2144 | 32313/33118
|
LHG-14T | 14000 | S420*180 | 1840 | 150*150*14 | 10*M22*1.5 ISO | 335 | ~2198 | 32315/32319 |
LHG-16T | 16000 | S420*200 | 1850 | 150*150*16 | 10*M22*1.5 ISO | 335 |
~2272 | 32314/3 |
Our advantages
1. Our demolition shear,both the main-body and jaws are made from hardox450.
2.We use boring machine adjust the precision after welding,to avoid the big tolerance leaded by welding
stress
3.The 2pcs jaws is made from 50mm thick hardox450 steel,much more longer life than cast jaw.
4.The blade of this demolition shear,can cut 30mm-diameter steel rod,can cut 20mm-thick steel sheet.
5. Blade is 2pcs 4-side blade,so have a much more longer life
6. Hydraulic oil cylinder is equipped with a protective cover to obstruct the splash of
concrete and steel debris
7The grease injection nipples have cover protected,won’t be damaged in rough
demolition work
9.We have test this products many years,it’s high performance,durable,convenient to operate, it’s a proven technology.