How The Landing Gear Works On A Trailer: A Comprehensive Guide by LUEN

If you're a trailer owner or someone who frequently uses trailers, understanding how the trailer landing gear works is crucial. The landing gear, also known as the trailer legs or trailer landing legs, is a vital component that helps stabilize and support the trailer when it's not connected to a tow vehicle. Today, we'll dive into the workings of the landing gear, with a special focus on 

LUEN's high-quality landing gear systems.

At its core, the trailer landing gear features two distinct gears: a high-speed gear and a low-speed gear. These gears serve different purposes and are designed to make operating the landing gear easier and more efficient. Let's break down 

how they work and when to use each gear.

Low - Speed Gear: The Powerhouse

The low-speed gear is your go-to when you need extra torque to lift or lower the trailer. Imagine you're in a situation where your trailer is too low to the ground, and you need to raise it to hook up the fifth wheel. This is where the low-speed gear shines.

To engage the low-speed gear, simply push the landing gear handle in but not all the way. You'll notice a point where it stops short of fully engaging; this is the low-speed gear position. At this point, the gear mechanism will provide more leverage, making it easier to turn the handle, especially when dealing with heavy loads.

One way to know you're in the low-speed gear is by the ease of turning the handle. It should feel significantly easier to turn compared to the high-speed gear. This is because the low-speed gear multiplies the force you apply, allowing you to lift or lower the trailer with less effort.

High - Speed Gear: The Speedy Solution

On the other hand, the high-speed gear is perfect for quickly raising or lowering the trailer once you've achieved the initial lift with the low-speed gear. To engage the high-speed gear, push the handle in all the way until it clicks into place. This gear allows the landing gear legs to move faster, making it quicker to adjust the trailer's height.

Remember, when you're in the high-speed gear, turning the handle may feel more difficult because the gear ratio is different. But don't worry; this is normal. The high-speed gear is designed to move the landing gear legs quickly rather than providing extra torque.

Practical Tips for Using the Landing Gear

When Hooking Up: Always use the low-speed gear when your trailer is too low to hook up the fifth wheel. This will give you the extra leverage needed to lift the trailer.

Avoiding the Fifth Wheel Bind: When backing up to hook up your trailer, keep an eye on the front two wheels of the trailer. If the fifth wheel ends up behind the kingpin, you may need to use the low-speed gear to adjust the trailer's height and prevent binding.

Heavy Loads: If you're dealing with a very heavy load, the landing gear may be harder to turn. In this case, use the low-speed gear to provide the extra torque needed.

Testing and Adjusting: Sometimes, you may need to test and adjust between the low and high-speed gears to find the right balance. Start with the low-speed gear to get the initial lift, then switch to high-speed for quicker adjustments.

LUEN's Commitment to Quality

As a leading manufacturer of trailer landing gears, LUEN prides itself on providing durable, reliable, and easy-to-use landing gear systems. Our landing gears are designed with precision and tested under rigorous conditions to ensure they can handle even the heaviest loads.

In conclusion, understanding how the trailer landing gear works is essential for safe and efficient trailer operation. By familiarizing yourself with the low and high-speed gears, you'll be able to tackle any situation with confidence. And with LUEN's high-quality landing gears, you can trust that your trailer will be stable and supported whenever you need it.

So, the next time you're hooking up your trailer or adjusting its height, remember to use the appropriate gear and always prioritize safety.