How To Replace The Kingpin Wear Ring And Locking Hook

Replace the wear ring on the LUEN kingpin by removing the three allen bolts in their original position in the stock location and using a driver to pry on the chamfered side of the wear ring opening to remove the wear ring. Install the new wear ring on the original vehicle.

Replacement of the locking hook of the LUEN kingpin is as follows: after removing the wear ring of the kingpin, screw in the M12 bolt on the locking hook pin, pivot the locking hook pin upwards, remove the spring, take out the locking hook, replace it with a new one, and adjust the screw to recover.

The above is the method of replacing the wear ring and locking hook of LUEN kingpin, if there is anything else you don't understand you can consult our professional and technical personnel.